SNR22220EAKW33C4Double-Row Spherical Roller Bearing 100x180x46 mm 1:12 Taper Bore C4 Clearance W33 Lube Groove

Product Description

What this part is

An SNR 22220EAKW33C4 double-row spherical roller bearing, 100 mm tapered bore by 180 mm outside diameter by 46 mm width. Two rows of barrel-shaped rollers run on a shared spherical outer raceway, so the bearing self-aligns while carrying very heavy radial load and axial load in both directions. It suits conveyor pulleys, vibrating screens, crushers, fans, gearboxes and heavy process plant.

Decoding the designation

22220: double-row spherical roller bearing, 100 x 180 x 46 mm, 222-series section. EA: SNR reinforced internal design with an increased roller complement. K: 1:12 tapered bore. W33, written B33 in the SNR scheme: lubrication groove around the outer ring plus three radial lubrication holes. C4, written J40 in the SNR scheme: radial internal clearance two steps above normal.

What these specs mean in practice

The spherical outer raceway allows the inner ring and roller set to swivel inside the outer ring, so a shaft sitting slightly out of line with its housing still loads the rollers evenly across their length. Long conveyor shafts and fabricated screen bodies rarely hold better alignment, which is why this bearing type is standard there.

Two opposed roller rows carry thrust in both directions as well as radial load, so a separate thrust bearing is usually unnecessary in the arrangement.

C4 clearance is the specification that defines this bearing’s duty. It leaves substantially more room between rollers and raceways than the normal class, and that room is consumed by inner-ring thermal growth and by the interference the taper mounting creates. Screen bodies and hot fans run the inner ring far warmer than the housing, so a tighter clearance class would preload itself in service. C4 is a deliberate choice for that condition rather than a loose tolerance.

The 1:12 tapered bore is a mounting feature: drive-up distance along the taper sets the interference fit and therefore the residual clearance, giving repeatable clearance control on site with a lock nut and a feeler gauge.

Published specifications

Bore: 100 mm, tapered 1:12. Outside diameter: 180 mm. Width: 46 mm. Rows: 2. Rolling elements: barrel rollers on a spherical outer raceway. Radial internal clearance: C4 (SNR J40). Lubrication features: W33 / B33 groove and three outer-ring holes. Closure: open. Alignment: self-aligning. Axial load capacity: both directions.

Quantity and configuration

One bearing ships. The adapter sleeve is not included — the tapered bore mounts on an H320 sleeve, which seats on a 90 mm cylindrical shaft, with a KM20 lock nut and MB20 lock washer. Housings, seals and locking hardware are supplied separately.

Interchange guidance

Same-specification equivalents are tapered-bore 22220 K spherical rollers at C4 clearance with W33 features: SKF 22220 EK/C4, FAG 22220E1K.C4, NSK 22220EAKE4C4, Timken 22220KEJW33C4, Koyo 22220RHRKW33C4. Bearings of this envelope at C3 or normal clearance are a specification change, not a substitution — a hot screen or fan shaft fitted with a tighter clearance class loses its running clearance as it warms. The straight-bore 22220EAW33C4 is a different part and takes no adapter sleeve.