SKF7214CTCC78Angular Contact Ball Bearing – 70 mm Bore, 125 mm Outside Diameter, 24 mm Width, 15° Contact Angle, Straight Bore, Open

Product Description

What this part is

SKF single row angular contact ball bearing in the 72 series, ISO dimension series 02. Bore Diameter: 70 mm. Outside Diameter: 125 mm. Overall Width: 24 mm. Contact Angle: 15°. Number Of Rows: 1. Rolling Elements: Ball. Bore Type: Straight. Closure Type: Open. Bearing Material: Bearing steel. Series: 7200. Base Number: 7214. Unit Quantity: 1 Pc.

Decoding the designation

72 — angular contact ball bearing to ISO dimension series 02.

14 — bore code. Bore diameter 70 mm.

C — 15° contact angle.

What these specs mean in practice

Contact Angle: 15°. The load line runs at 15° to the radial plane, so the bearing carries radial load together with axial load in one direction. The shallow angle favours running speed and radial stiffness. Ring Type: One-piece inner and outer rings.

ISO dimension series 02 at a 70 mm bore gives a 125 mm outside diameter and a 24 mm width. Single row angular contact bearings of this size run in machine tool spindles, gearbox shafts, pumps and screw drive supports, mounted in opposed pairs or in tandem so that thrust is taken in both directions.

Quantity and configuration

Unit Quantity: 1 Pc. Single bearing, open on both faces, straight bore, one row of balls.

Interchange guidance

The cross-references listed are same-envelope, same-angle equivalents at 70 x 125 x 24 mm and 15°: FAG B7214C.T.P4S, NSK 7214CTR, NTN 7214C, Timken Fafnir 2MM214WICR, RHP B7214X2TA, Koyo 7214C, GMN S6214C, IBC 7214C.T and SNR 7214CG1. The carton carries the Fafnir designation 2MM214WI CR alongside the SKF number.