FAG3202BTVHP6Double-Row Angular Contact Ball Bearing, 15 x 35 x 15.9 mm, 25 Degree Contact Angle, P6 Precision, Polyamide Cage, Open, 1 Pc

Product Description

What this part is

FAG 3202-B-TVH-P6 double-row angular contact ball bearing. Brand: FAG. Manufacturer Part Number: 3202BTVH.P6. Base Number: 3202. Bearing Type: double-row angular contact ball bearing. Series: 32, ISO double-row angular contact. Bore: 15 mm. Outside Diameter: 35 mm. Overall Width: 15.9 mm (5/8 in). Bore Type: straight. Contact Angle: 25°. Number of Rows: 2. Rolling Elements: balls. Closure Type: open. Cage Type: solid snap cage, ball guided. Cage Material: glass-fibre reinforced polyamide. Precision Class: P6 (ISO tolerance class 6), ABEC 3. Internal Clearance: normal (CN). Design Units: Metric. Unit Quantity: 1 Pc.

Published ratings and mounting data

Dynamic Load Rating: 11.8 kN. Static Load Rating: 7.1 kN. Fatigue Load Rating: 0.36 kN. Reference Speed: 17 100 rpm. Limiting Speed: 19 000 rpm. Item Weight: 0.065 kg (0.14 lb). Maximum continuous operating temperature: 120 °C. Minimum operating temperature: −20 °C. Harmonization Code: 8482.10.50.

Decoding the designation

32: the ISO double-row angular contact ball bearing series, maximum capacity light section. MRC-lineage catalogues call the same envelope 5202, which is why both numbers appear here. Bore code 02: 15 mm bore. B: FAG’s modified internal construction, which on the 32xx-B-TVH design gives a 25° contact angle. TVH: solid snap cage in glass-fibre reinforced polyamide, ball guided. P6: ISO tolerance class 6, with tighter bore, outside diameter and running accuracy than the standard P0 class.

What these specs mean in practice

Two rows of balls run at opposed angles inside a single pair of rings, so one bearing takes radial load plus thrust in both directions and resists tilting moments in far less axial space than two single-row bearings side by side. Both ball rows are ground into the same rings at the factory, so the preload relationship is fixed and the bearing arrives as a complete locating unit. That suits a small shaft that has to be held axially both ways and resist a tilting moment: worm gear shafts, small pump and blower spindles, indexing heads, tensioner and idler assemblies.

The 25° contact angle on the -B design sets the balance of duty. A shallower angle gives more radial capacity and higher speed; a steeper one more thrust. FAG’s current X-life replacement for this bearing, the 32xx-BD-XL-TVH, runs 30° on the same seat, so the load split differs between the two designs.

P6 buys tighter bore and outside-diameter tolerance and better running accuracy, which matters most on a small assembly where the tolerance stack is a large share of the total. The polyamide cage runs quietly at low mass with a continuous temperature limit of 120 °C.

Quantity and configuration

Unit Quantity: 1 Pc. One complete non-separable bearing: both rings, both ball rows and the cage.

Interchange guidance

The 15 x 35 x 15.9 mm double-row angular contact envelope is the ISO 3202, so SKF 3202 A, NSK 3202BTN, NTN 5202 and MRC 5202 share the same seat, and the 5202 form in this listing is that bearing in MRC-lineage nomenclature. Contact angle governs the substitution: this -B design is 25°, while FAG’s current 3202-BD-XL-TVH and MRC’s 5200 series both run 30°, making them related sizes on the same envelope. A standard P0 3202 is a related build, dimensionally interchangeable at a looser tolerance than this P6 part. Enclosed builds on this envelope are the 3202-B-2RSR-TVH and 3202-B-2Z-TVH. Searchable variants of this number are 3202BTVH.P6, 3202BTVHP6, 3202-B-TVH-P6, 3202 B TVH P6, 3202BTVH, 3202-B-TVH and 5202B.