RHP1020-20GSelf-Lube Insert Bearing Set Screw 20x47x31 mm 1020 20G

Product Description

What this isOne (1) RHP 1020-20G Self-Lube bearing insert for a 20 mm shaft. A single row deep groove ball bearing in a spherical outer ring, so it self-aligns in its housing, with an extended inner ring locked to the shaft by two knurled cup-point set screws. It has a relubrication facility, so it can be regreased in service. Insert only, no housing.

Made in England. Factory wrapped, in the original RHP Self-Lube box marked 1020 20 G. It fits RHP and NSK-RHP Self-Lube housings for a 20 mm shaft (NP20 pillow block, SF20 and SFT20 flanges, LFTC20, SLC20) and shares its principal dimensions with the UC204, 20 x 47 x 31 mm.

How the part number breaks down10 — spherical outside diameter. RHP uses 11 for a parallel OD, and 12 and 13 for the short inner ring versions.

20 — the basic size, which sets the 47 mm outside diameter and the housing it fits. On the standard part it matches the bore; the same size is also made with inch bores, such as the 1020-3/4G.

-20 — the bore, 20 mm.

G — relubrication facility. Set screw locking is the standard; the eccentric collar version carries DEC, as in the 1020-20DECG, and a T prefix marks the triple-lip seal version.

Also sold and searched as 1020 20G and 102020G.

Item SpecificationsBrand: RHPPart number: 1020-20GType: Self-Lube ball bearing insert, spherical outer ringBore: 20 mmOutside diameter: 47 mmInner ring width: 31 mmLocking: Two set screwsLubrication: RelubricatableDynamic load rating: 12.8 kNStatic load rating: 6.65 kNMaximum speed: 6,700 rpmWeight: 0.13 kgCountry of origin: England