ABB3BSE008516R1Analog Input Module — ABB S800 I/O AI810, 8 channels, 0/4-20 mA, 0/2-10 V, 12-bit

Product Description

What this part isThe ABB 3BSE008516R1 is the AI810 analog input module for the ABB S800 I/O system. It has 8 single-ended unipolar channels, each configurable as a current input (0 to 20 mA, 4 to 20 mA) or a voltage input (0 to 10 V, 2 to 10 V DC), with 12-bit resolution and one group of 8 channels isolated from ground. The current input withstands a short circuit to the transmitter supply of at least 30 V DC, with current limiting by a PTC resistor.

SpecificationsArticle number: 3BSE008516R1

Type designation: AI810

Type: Analog input

Signal specification: 0..20 mA, 4..20 mA, 0..10 V, 2..10 V

Number of channels: 8

Signal type: Unipolar single ended

Resolution: 12 bit

Input impedance: 290 kΩ (voltage input), 230 to 275 Ω (current input)

Isolation: Groupwise isolated from ground

Under/over range: -5 % / +15 %

Error: Max. 0.1 %

Temperature drift: Voltage typ. 70 ppm/°C, max. 100 ppm/°C; current typ. 50 ppm/°C, max. 80 ppm/°C

Input filter (rise time 0 to 90 %): 140 ms

Update cycle time: 8 ms

Current limiting: Transmitter power can be current limited by the MTU

Maximum field cable length: 600 m (656 yd)

Max input voltage (non destructive): 30 V DC

NMRR, 50 Hz, 60 Hz: > 40 dB

Rated insulation voltage: 50 V

Dielectric test voltage: 500 V AC

Power dissipation: 1.5 W

Current consumption +5 V Modulebus: 70 mA

Current consumption +24 V Modulebus: 40 mA

Current consumption +24 V external: 0

HART: No

SOE: No

Redundancy: No

Intrinsic safety: No

Front LEDs: F(ault), R(un), W(arning)

Supervision: Internal power supply

Status indication: Module Error, Module Warning, Channel error

Keying code: AE

Operating temperature: 0 to +55 °C (+32 to +131 °F), approvals issued for +5 to +55 °C

Storage temperature: -40 to +70 °C (-40 to +158 °F)

Max ambient temperature: 55 °C (131 °F); 40 °C (104 °F) for vertical mounting in compact MTU

Relative humidity: 5 to 95 %, non-condensing

Pollution degree: Degree 2, IEC 60664-1

Corrosion protection: ISA-S71.04: G3

Protection class: IP20 according to IEC 60529

Mechanical operating conditions: IEC/EN 61131-2

EMC: EN 61000-6-4, EN 61000-6-2

Equipment class: Class I according to IEC 61140 (earth protected)

Dimensions and weightWidth: 45 mm (1.77 in)

Depth: 102 mm (4.01 in), 111 mm (4.37 in) including connector

Height: 119 mm (4.7 in)

Weight: 0.2 kg (0.44 lb)

ApprovalsCE mark: Yes

Electrical safety: EN 61010-1, UL 61010-1, EN 61010-2-201, UL 61010-2-201

Hazardous location: Class 1 Div 2 cULus, Class 1 Zone 2 cULus, ATEX Zone 2

Marine certification: ABS, BV, DNV, LR

RoHS compliance: EU RoHS, UAE RoHS, CN RoHS

WEEE compliance: Directive 2012/19/EU

Compatibility and replacementPlatform: ABB S800 I/O

Use with module termination units (MTU): TU810, TU812, TU814, TU818, TU830, TU833, TU835, TU838, TU850