RHP1035-35GSelf-Lube Insert Bearing Set Screw 35x72x42.9 mm 1035 35G

Product Description

What this isOne (1) RHP 1035-35G Self-Lube bearing insert for a 35 mm shaft. A single row deep groove ball bearing in a spherical outer ring, so it self-aligns in its housing, with an extended inner ring locked to the shaft by two knurled cup-point set screws. It has a relubrication facility, so it can be regreased in service. Insert only, no housing.

Made in England. Factory wrapped, in the original RHP Self-Lube box marked 1035-35G and Made in England; the ring is etched 1035-35G and ENGLAND. It fits RHP and NSK-RHP Self-Lube housings for a 35 mm shaft (NP35 pillow block, SF35 and SFT35 flanges, SL35, SNP35, ST35) and shares its principal dimensions with the UC207, 35 x 72 x 42.9 mm.

How the part number breaks down10 — spherical outside diameter. RHP uses 11 for a parallel OD, and 12 and 13 for the short inner ring versions.

35 — the basic size, which sets the 72 mm outside diameter and the housing it fits. On the standard part it matches the bore; the same size is also made with inch bores, such as the 1035-1-1/4G and 1035-1.7/16G.

-35 — the bore, 35 mm.

G — relubrication facility. Set screw locking is the standard; the eccentric collar version carries DEC, and a T prefix marks the triple-lip seal version, as in the T1035-35G.

Also sold and searched as 1035 35G and 103535G.

Item SpecificationsBrand: RHPPart number: 1035-35GType: Self-Lube ball bearing insert, spherical outer ringBore: 35 mmOutside diameter: 72 mmInner ring width: 42.9 mmLocking: Two set screwsLubrication: RelubricatableDynamic load rating: 25.7 kNStatic load rating: 15.3 kNMaximum speed: 4,500 rpmWeight: 0.51 kgCountry of origin: England