GE-FanucIC600CB512Series Six Expanded Logic Control CPU Module — Model 600/6000 PLC Processor, Separate Memory Module Required

Product Description

What this part is

This is a central processor module for the GE Series Six family of programmable logic controllers — the Model 600 and Model 6000 platforms. It installs in the CPU slot of a Series Six CPU rack and executes the ladder program that runs the machine or process. GE marketed it as the Expanded Logic Control Module. “Expanded” describes the instruction set and scan capability tier relative to the base processor, not physical expansion of anything.

Where it sits in the Series Six CPU family:
Knowing the family order matters when you are sourcing a replacement, because a plant that has a base processor cannot always drop in a higher tier without revisiting the program, and a plant that has a higher tier should not step down. The published family runs: IC600CB502 Logic Control, IC600CB512 Expanded Logic Control, IC600CB515 Expanded II Logic Control, IC600CB524 Arithmetic Control, IC600CB525 Advanced Logic Control, IC600CB526 Expanded Logic Control. This module is the second rung — a step above the base 502.

Quantity and configuration

Unit Quantity: 1 processor module. Program storage lives on a separate memory module from the IC600CM5xx, IC600LR6xx or IC600LX6xx ranges, which installs alongside the processor in the rack. The matching memory module we carry is the IC600CM548A 8K CMOS logic memory module, SKU EG5#M6IYKK.

Published ratings and environmental data

Platform: GE Series Six, Model 600 and Model 6000 programmable controllers.

Function: central processor, Expanded Logic Control tier.

Mounting: CPU slot of a Series Six CPU rack.

User memory: none on board; program storage is on a separate memory module.

Operating temperature: 0 to +60 °C.

Storage temperature: −20 to +70 °C.

Revision suffixes and interchangeability

Suffix letters A, B, C and E appear across the IC600CB5xx family — IC600CB502E is documented, for instance. Treat the suffix as a board or firmware revision level. In this family revisions are generally interchangeable within the same base number. Match the base number IC600CB512 first; verify the suffix against your documentation if the application is critical. The authoritative reference is GE publication GEK-25367E.

Obsolescence and why a shelf spare is the economic decision:
The ownership trail buyers need to follow is GE Series Six, then GE Fanuc Automation, then GE Intelligent Platforms, then Emerson, which completed its acquisition of GE Intelligent Platforms in February 2019. This part is discontinued at every step of that chain. There is no factory replacement. The official migration path is PACSystems RX3i, which is a different platform — different racks, different I/O, different programming environment.

That migration is the reason the surplus market for these boards exists. Series Six controls are still running production in steel mills, paper machines, water and wastewater treatment plants and utility installations. Replacing one with RX3i is not a board swap; it is a rewire, a reprogram, a requalification and, on a plant of any size, a six-figure capital project with downtime attached. Against that number, keeping a known-good spare CPU in the crib is a rounding error.

Interchange guidance

Search terms and forms that refer to this same part include IC600CB512, IC600-CB-512, IC600CB512A and IC600CB512B, sold variously as GE, GE Fanuc and GE-Emerson. Do not cross it against IC600CB502, 515, 524, 525 or 526 without checking the program requirements — those are different capability tiers in the same slot, not equivalents. Available reman and surplus only.