Power OneMAP40-3100AC-DC Open Frame Power Supply — 40 W Triple Output, +5 V 3 A, +12 V 2 A, -12 V 0.3 A, 90-264 VAC Input

Product Description

What this part is

The Power-One MAP40-3100 is a 40 W triple-output open frame AC-DC switching power supply from the MAP30/40/42 Series, now supported by Bel Power Solutions. Type: Open frame switching power supply. Series: MAP40. Number of Outputs: 3. The board fits the international standard 3 x 5 in footprint, with input and output connections on single-row Molex connectors. The board carries the CE Mark.

Decoding the designation

MAP40 — the 40 W multiple-output member of the MAP30/40/42 Series.

3100 — the triple-output model delivering +5 V, +12 V and -12 V.

G suffix — the RoHS lead-free version, MAP40-3100G. The unsuffixed MAP40-3100 uses the lead solder exemption.

Specifications

Output Power: 40 W maximum with convection cooling. Output 1: +5 V, 3 A, peak 5 A, adjustable 4.75 V to 5.25 V. Output 2: +12 V fixed, 2 A, peak 3.5 A, quasi-regulated. Output 3: -12 V fixed, 0.3 A, peak 0.5 A. Line Regulation: 0.2% on +5 V, 1% on +12 V and -12 V. Load Regulation: 2% on +5 V, 3.5% on +12 V, 2% on -12 V. Ripple and Noise: 1% peak to peak, 20 MHz bandwidth.

Input Voltage: 90 to 264 VAC. Input Frequency: 47 to 63 Hz. Input Current: 1.2 A RMS at 90 VAC, 40 W load. Hold-up Time: 15 ms at 115 VAC. Inrush Current: 38 A peak at 264 VAC, thermistor limited. Switching Frequency: 25 kHz nominal, fixed. Efficiency: 70% typical at full load, 120 VAC. Overload Protection: 130%, automatic recovery. Input Protection: internal AC line fuse.

Operating Temperature: 0 to 50 °C at 100% load, to 70 °C at 50% load, derating 2.5% per °C above 50 °C. Storage Temperature: -40 to 85 °C. Relative Humidity: 5 to 95%, non-condensing. MTBF: greater than 311,000 hours. Safety Approvals: UL/CSA 60950-1, IEC 60950-1, EN 60950-1. EMI: EN55022 / CISPR 22 and FCC Part 15 Class B.

Dimensions and mounting

Dimensions: 5.00 x 3.00 x 1.25 in (127.0 x 76.2 x 31.8 mm). Item Weight: 0.26 kg (0.6 lb). Mounting Type: Chassis mount, open frame board. Input Connector: J1 Molex single-row, pin 1 neutral, pin 2 line. Output Connector: J2 Molex single-row, mates with Molex Series 2139 or 41695 0.156 in crimp terminal housing. Safety Earth: 0.250 x 0.032 in Faston terminal.

Compatibility and replacement

MPN Variants: MAP40-3100, MAP403100, MAP40-3100G. Same-series models with other output sets: MAP40-3000G, MAP40-3101G, MAP40-3105G, MAP40-3500G, MAP40-3003G. CAD model and data sheet: available from Bel Power Solutions (belfuse.com).

Frequently asked questions

What outputs does the MAP40-3100 provide?
Three outputs: +5 V at 3 A, +12 V at 2 A and -12 V at 0.3 A, 40 W maximum total.

What input voltage does the MAP40-3100 accept?
Universal AC input, 90 to 264 VAC at 47 to 63 Hz.

What is the difference between MAP40-3100 and MAP40-3100G?
The G model is the RoHS lead-free version with the same electrical ratings; the unsuffixed model uses the lead solder exemption.