SKF6302C3Deep Groove Ball Bearing – Straight Bore, 15 mm ID, 42 mm OD, 13 mm Width, Open, C3 Internal Clearance, 18 Pcs

Product Description

What this part is: SKF 6302 C3 deep groove ball bearing. Bore 15 mm, outside diameter 42 mm, width 13 mm. Series: 63. Straight bore, open on both faces, pressed steel cage. Carton marking: JEM. Country of origin: Spain. Decoding the designation: 6302: deep groove ball bearing, 15 mm bore, 63 dimension series. C3: radial internal clearance greater than normal. JEM is a carton marking recorded here as a searchable part-number form. Published ratings: Dynamic load rating: 11.9 kN. Static load rating: 5.4 kN. Limiting speed: 24,000 rpm. Operating range: −30 °C to 120 °C. Mass: 0.18 lb each. What these specs mean in practice: C3 clearance leaves more room in the ball path than a CN bearing, which suits a tight interference fit on the shaft, a hot running inner ring, or an electric motor position where the shaft grows in service. Open faces allow either grease packing or an oil-lubricated housing. The 63 series is the wider, heavier section at this bore, so the 6302 carries more load than a 6002 on the same 15 mm shaft. Quantity and configuration: Eighteen bearings ship together as one lot. Unit quantity: 18 Pcs. Fitting notes: Straight 15 mm bore on a cylindrical shaft seat. Mounting force is applied to the ring being fitted so the load never passes through the ball complement. Interchange guidance: Same-specification equivalents: FAG 6302-C3 and NTN 6302C3. Searchable forms of the number: 6302C3, 6302 C3, 6302-C3, 6302JEM, 6302.