Ball Bearing

472 Results

Bearings, Ball Bearing

BCA

XLS-4-3/4

Deep Groove Ball Bearing — Open, 4-3/4 in ID, 6-1/2 in OD, 7/8 in Width, XLS Inch Series

$92.79

17 in stock

Bearings, Ball Bearing

RBC

KP12A-FS464

Sealed Control Ball Bearing – 0.750 in Bore, 1.625 in OD, 0.4375 in Width, Full Complement

$63.74

1 in stock

Bearings, Ball Bearing

MRC

307SFFC

Deep Groove Ball Bearing — 35 mm Bore, 80 mm OD, 34.93 mm (1-3/8 in) Cartridge Width, Shields Both Sides

$28.78

2 in stock

Bearings, Ball Bearing

MRC

NF1007

Cylindrical Roller Bearing — 35 mm ID, 62 mm OD, 14 mm Width, Single Row, Separable, Machined Brass Cage, One-Direction Location

$42.49

37 in stock

Bearings, Ball Bearing

SKF

6312-Z

Deep Groove Ball Bearing – 60 mm Bore, 130 mm OD, 31 mm Width, One Steel Shield

$40.60

1 in stock

Bearings, Ball Bearing

MRC

208MF

Maximum Capacity Ball Bearing — 40 mm Bore, 80 mm OD, 18 mm Width, Filling Notch, Single Shield

$42.49

15 in stock

Bearings, Ball Bearing

MRC

208SZZC

Deep Groove Ball Bearing – 40 x 80 x 30 mm Cartridge Width, Two Rubber Seals

$25.47

4 in stock

Bearings, Ball Bearing

MRC

R18FF

Deep Groove Ball Bearing – 1-1/8 in Bore x 2-1/8 in OD x 1/2 in Wide, Shields Both Sides, Three-Piece Lot

$25.46

1 in stock

Bearings, Ball Bearing

MRC

205SFFG

Deep Groove Ball Bearing – 25 mm Bore x 52 mm OD x 15 mm Wide, Shields Both Sides, Snap Ring, 10-Piece Lot

$101.96

1 in stock

You've reached the end

Ball Bearings for Everyday Reliability

Motors, pumps, fans, and light gear drives

Most maintenance work begins and ends with a radial ball bearing: one row, moderate load, high speed, nothing exotic. What we hold covers open, single-shielded, double-shielded, and rubber-sealed builds in metric bores from small motor sizes up through 90 mm and larger, including older MRC and Fafnir designations that map onto current 6200 and 6300 numbers. Pick the closure by environment, shields for clean oil-misted spots, contact seals where washdown or airborne dust is present, open where the housing already holds grease. Legacy brand codes are usually the hard part, and translating one to its modern equivalent is routine for us. Thin-width and wide-section variants sit in the deep groove listings.

Ask for a part we don't list

New Inventory Daily | Same Day Free Shipping

Ball Bearing

Fast Delivery

Need help finding the right part?

Deep Groove Ball Bearing — Open, 4-3/4 in ID, 6-1/2 in OD, 7/8 in Width, XLS Inch Series

Sealed Control Ball Bearing – 0.750 in Bore, 1.625 in OD, 0.4375 in Width, Full Complement

Deep Groove Ball Bearing — 35 mm Bore, 80 mm OD, 34.93 mm (1-3/8 in) Cartridge Width, Shields Both Sides

Cylindrical Roller Bearing — 35 mm ID, 62 mm OD, 14 mm Width, Single Row, Separable, Machined Brass Cage, One-Direction Location

Deep Groove Ball Bearing – 60 mm Bore, 130 mm OD, 31 mm Width, One Steel Shield

Maximum Capacity Ball Bearing — 40 mm Bore, 80 mm OD, 18 mm Width, Filling Notch, Single Shield

Deep Groove Ball Bearing – 40 x 80 x 30 mm Cartridge Width, Two Rubber Seals

Deep Groove Ball Bearing – 1-1/8 in Bore x 2-1/8 in OD x 1/2 in Wide, Shields Both Sides, Three-Piece Lot

Deep Groove Ball Bearing – 25 mm Bore x 52 mm OD x 15 mm Wide, Shields Both Sides, Snap Ring, 10-Piece Lot

Ball Bearings for Everyday Reliability