SiemensSimodrive 610 / 210 AC Feed Drive PCB with Voltage Clamping, Drawing 462 010.9001.00, Revisions C D E

Product Description

What this part is

A Siemens plug-in printed circuit board for the Simodrive 610 / 210 AC feed drive (FDD) system, the version that includes voltage clamping. It fits the Simodrive 610 drive rack and carries the Siemens PCB drawing number 462 010.9001.00, with revision letters C, D and E marked. Siemens catalogued this board configuration as being supplied without a pulsed resistor and without installation material — which is exactly how it is sold here.

This is a card, not a complete drive and not a boxed power supply. It has no motor terminals of its own and it does not replace a power stage or an infeed. It is the feed drive control board that goes into the drive rack, not the drive assembly.

Decoding the order code

6SC6: Siemens Simodrive 610 / 210 drive system. 6SC6100: the plug-in electronics boards for that system. -0AB00: the specific board, AC feed drive PCB with voltage clamping. 462 010.9001.00: the Siemens printed circuit board drawing number marked on the card. C D E: the PCB revision letters stamped on this example.

Published specifications

Type: AC feed drive (FDD) printed circuit board with voltage clamping. System: Siemens Simodrive 610 / 210. Order code: 6SC6100-0AB00. PCB drawing number: 462 010.9001.00. Revisions marked: C, D, E. Configuration: supplied without pulsed resistor and without installation material. Format: plug-in card for a Simodrive 610 drive rack.

What these specs mean in practice

A clamping-equipped board handles regenerative energy differently from a version specified for use with an external pulsed resistor. A machine wired for one and fitted with the other will either fail to dissipate braking energy or leave a resistor circuit orphaned. Simodrive 610 boards went through several revisions and the later revisions are the ones that stayed in service.

These drives are long out of production and are maintained board by board.

Quantity and configuration

One printed circuit board.

What is not included

Board only. No pulsed resistor or braking resistor. No installation material, mounting kit or hardware. No drive rack, card cage or backplane. No power stage, transistor module or heatsink. No other cards from the rack, no personality or option modules. No cables, ribbon cables, connector kits or terminal blocks. No mains contactor, line reactor or filter. No documentation.

Interchange guidance

6SC6100-0AB00, 6SC61000AB00 and 6SC6100-0AB00 with the 462 010.9001.00 drawing number all identify this card. Other 6SC6100 suffixes are different boards in the same rack — 6SC6100-0GB11 for example is the power supply and voltage limiting card, and 6SC6100-0NA01 is a control board — so treat them as related, not equivalent. Simodrive 610 / 210 cards do not fit Simodrive 611 (6SN1) racks.