Motor Starters vs. Contactors vs. Overload Relays: What Each One Does and Why You Need All Three
When a motor stops running, the first instinct is to find the part that looks
Availability:
2 in stock
Two-bolt low-base cast iron pillow block for a 1-1/8 in shaft. Eccentric locking collar, sealed ball insert, base-to-bore centre height 1.56 in. 1 Pc.
List Price
$32.21
2 in stock
2 in stock
On the Shelf & Ready to Ship
On all orders
No Risk, No Hassle
Also Available From:
| MFR / Brand | DODGE |
|---|---|
| MPN | P2B-SXRB-102 131835 |
| Model | P2BSXRB102 RAK1-1/8 |
| ID | 1-1/8 in |
| Material | Cast Iron |
|---|---|
| Series | 206 |
| Condition | New |
| Type | Flanged Mount Bearing |
| Base Number | P2B-SXRB-102 |
| Industry Terms | Pillow block; plummer block; two-bolt block; low base pillow block; mounted ball bearing; eccentric collar block |
| Common Misspellings | P2B SXRB102; P2BSRXB-102; P2B-SXBR-102; pillowblock; plumber block |
| Application Types | Conveyor shafts; fan and blower shafts; line shafting; material handling; agricultural drives |
| Bolt Center To Center | 4.75 in |
| Number Of Bolt Holes | 2 |
| Bolt Center To Center Length | Base to bore centreline 1.56 in |
| Number Of Bolt Holes For Fasteners | 2 |
| Bore Shaft Size | 1-1/8 in (28.575 mm) |
| Housing Style | Two-bolt pillow block, low backing (low base) |
| Locking Method | Eccentric locking collar |
| Mpn Variants | P2B-SXRB-102; P2BSXRB102; P2B SXRB 102; P2BSXRB-102; 131835 |
| Distributor Stock Numbers | Dodge / Baldor stock number 131835 |
| Manufacturer Status | Dodge is a Baldor / ABB brand; now marketed under Dodge Industrial |
| Additional Attributes | Low-backing casting reduces shaft centre height relative to a standard P2B of the same bore. Ball insert, not a spherical roller insert. |
| Bearing Type | Mounted ball bearing unit, pillow block |
| Item Weight | 3.10 lbs |
| Number Of Rows | 1 |
| Bore Type | Straight |
| Snap Ring Included | No |
| Duty Type | Intermediate Duty |
| Locking Device | Eccentric Collar |
| Harmonization Code | 8483.20.40 |
| Mounting Arrangement | Self-aligning sphered insert seat |
| Housing Material | Cast Iron |
| Expansion Type | Non-Expanding |
| Design Units | Inch |
| Part Number | P2B-SXRB-102 |
| Cross Reference 1 | Dodge P2B-SXR-102 (standard backing, related size) |
|---|---|
| Cross Reference 2 | Dodge P2B-SXRB-102-FF, stock number 068197 (same unit with grease fitting) |
| Cross Reference 3 | RAK (legacy designation carried on the listing) |
A Dodge P2B-SXRB-102 mounted ball bearing unit: a two-bolt cast iron pillow block on a low base, carrying a sealed single-row ball insert locked to the shaft by an eccentric collar. Bore is 1-1/8 in. Dodge stock number 131835.
P2B — two-bolt pillow block housing
SXR — sealed ball bearing insert with an eccentric locking collar
B — low backing, a reduced base-to-bore centre height; Dodge catalogues P2B-SXR and P2B-SXRB as separate numbers
102 — bore code in sixteenths above one inch: 1 + 2/16 = 1-1/8 in
131835 — Dodge stock number for the same unit
Two-bolt pillow block, low base. Base-to-bore centre height is 1.56 in. The low-backing casting puts the shaft centreline closer to the mounting surface than a standard P2B of the same bore, which is what makes it a distinct catalogue number rather than a substitution.
The eccentric collar locks by driving the offset collar face against the offset counterbore in the extended inner ring, then setting a screw onto the shaft. It grips harder in the direction of rotation than a plain setscrew and needs no keyway or shoulder, so commercial cold-drawn shafting is adequate. Against a Grip-Tight or adapter-sleeve unit it gives up concentricity, which places these units in conveyor, fan and general line-shaft duty.
The insert here runs balls, so load is carried at points rather than along lines: high speed capability and low friction, with radial capacity below a spherical-roller insert of the same envelope such as a Dodge S-2000.
Shaft size: 1-1/8 in (28.575 mm)
Bore code: 102
Housing style: two-bolt pillow block, low backing
Base to bore centreline: 1.56 in
Housing material: cast iron
Rolling element: ball, single row
Locking method: eccentric locking collar
Closure: sealed insert
Expansion: non-expansion
Dodge stock number: 131835
1 Pc. Complete unit: housing, ball insert and eccentric locking collar assembled.
The block seats on a flat rigid face, shimmed where the surface is uneven. Bolts stay slack until the shaft is through both blocks so the sphered insert seat can find its own alignment, then the collar is driven in the direction of shaft rotation and its setscrew tightened.
The standard-height equivalent is the Dodge P2B-SXR-102, and the same unit with a grease fitting is the P2B-SXRB-102-FF. Inch two-bolt pillow blocks of 1-1/8 in bore with an eccentric collar from other makers — SKF SY..FM, SealMaster MP series — match the shaft and the locking method, but bolt centres and centre height vary between makers, so they are related sizes unless those two dimensions are matched. A Dodge S-2000 unit of the same bore carries a double-row spherical roller insert and is a different part.
A shipping cutoff banner measures a vendor’s dock. It tells
When a motor stops running, the first instinct is to find the part that looks
From Caligula’s luxury fleet to modern factories, this is the story of how a single
When sourcing a replacement bearing, you will often find both Timken and SKF options for
Our team can locate, cross-reference, and source all parts.
Our team can locate, cross-reference, and source all parts.
Sort
Brand
Price
MPN
Categories
